P-30.01 - Petroleum Products Act

Section 6 Disposition versions

2007-04-01

6. (Repealed).

1987, c. 80, s. 6; 1997, c. 64, s. 2; 2005, c. 10, s. 7.

1999-04-30

6. Petroleum equipment must, to meet the requirements of section 4,

(1)  be manufactured and installed in such a way as to safely contain the petroleum products intended to be placed in it, and to resist wear, normal handling, fire and shocks;

(2)  be sufficiently leakproof to ensure against the risk of explosion, fire, spillage or other accidents, and be maintained in good working order;

(3)  be housed, or installed in such a way as to prevent unauthorized persons from gaining access to it and to prevent objects that could increase the risk of accident from coming into contact with it;

(4)  be equipped with the necessary protection devices, and be installed in such a way as to ensure maximum safety to persons having access to it or being supplied from it;

(5)  be manufactured and installed in such a way as to be easily maintained, repaired or dismantled.

1987, c. 80, s. 6; 1997, c. 64, s. 2.

1999-04-01

6. No person or company may, for others, perform or cause the performance of installation, alteration, maintenance or demolition work on petroleum equipment, or make or submit bids, personally or through another person, to perform or cause the performance of such work for a consideration unless he or it is the holder of an installer’s permit issued by the Minister.

1987, c. 80, s. 6.